Cisco's Catalyst WS-X45-SUP6-E is a 4500 E series Supervisor Engine 6-E control processor. It is equipped with CenterFlex technology which enables granular optimization of real-time voice, video, and data to ensure higher productivity. The Cisco Catalyst WS-X45-SUP6-E control processor has an installed memory of 512MB which can be up expanded to a maximum of 1GB.
General | |
---|---|
Product Description | Cisco Supervisor Engine 6-E - control processor |
Device Type | Control processor |
Installed Modules Qty (Max) | 0 ( 2 ) |
Enclosure Type | Plug-in module |
Processor / Memory / Storage | |
Processors Installed | 1 x 1.3 GHz |
RAM Installed ( Max ) | 512 MB ( 1 GB ) - SDRAM |
Networking | |
Form Factor | Plug-in module |
Ports Qty | 2 |
Connectivity Technology | Wired |
Data Link Protocol | 10 Gigabit Ethernet |
Switching Protocol | Ethernet |
Network / Transport Protocol | NTP, ICMP/IP |
Routing Protocol | OSPF, RIP, BGP-4, RIP-2, BGP, EIGRP, HSRP, IGMP, DVMRP, VRRP, PIM-SM, static IP routing, GRE, OSPFv3, PIM-SSM, Multiprotocol BGP, MSDP, RIPng, MLDv2, MLD |
Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3 |
Performance |
Switching capacity : 320 Gbps IPv4 routing : 250 Mbps IPv6 routing : 125 Mbps |
Capacity |
QoS hardware entries : 64000 Security services entries : 64000 Hardware forwarding entries : 256000 Multicast entries (IPv4) : 128000 Multicast entries (IPv6) : 64000 MAC addresses : 55000 Virtual interfaces (VLANs) : 4096 IPv6 routes : 128000 IPv4 routes : 256000 |
Status Indicators | Link activity, bandwidth utilization %, link OK, status |
Features | Auto-negotiation, VLAN support, IGMP snooping, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Access Control List (ACL) support, Quality of Service (QoS), Multicast Suppression, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP) |
Expansion / Connectivity | |
Expansion Slots Total (Free) |
2 ( 2 ) x X2 1 ( 1 ) x CompactFlash Card |
Interfaces |
1 x management - console - RJ-45 1 x management - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 1 x USB - 4 pin USB Type A 1 x USB - 4 pin USB Type B |
Compatible Slots | 1 x expansion slot |
Miscellaneous | |
Compliant Standards | CE, FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, CSA 22.2 No. 60950, ACA TS001, AS/NZS 3260, ICES-003 Class A, FCC CFR47 Part 15 |
Software / System Requirements | |
OS Required | Cisco IOS 12.2(40)SG |
Environmental Parameters | |
Operating Temperature Range | 0°C to 40°C |
Operating Humidity Range | 10% to 90% |
Half of our customers ask for a refurbished price.
Get more for your money. With savings of over 50% compared to NEW equipment.
Refurbished has Fewer Returns
The percentage of returns for refurbished products from Digital Devices, Inc is significantly low. This is mainly due to the rigorous testing procedures.
Refurbished has Fewer Failures
Refurbished equipment has been tried and tested. Tests demonstrate that the failure of new product is highest within the first 48 hours. Hence you are buying a better and reliable product by purchasing refurbished.
Warranty
Digital Devices, Ltd offers a 90 days warranty on all refurbished equipment. In some cases it matches New equipment warranty at a fraction of price.
If you're logged in, please check your details and submit. If you're not logged-in/registered, please fill in the form below and submit. We will get back to you with a quote within one working day
* Denotes Required Field