Cisco's Catalyst WS-C3750G-24T-S is a 24 ports fixed configuration switch. It has a DRAM memory of 128MB and consumes 135Watts of power when operational. The Cisco Catalyst WS-C3750G-24T-S switch can only be used with AC current and can support up to 12000 MAC entries.
| General | |
|---|---|
| Product Description | Cisco Catalyst WS-C3750G-24T-S |
| Device Type | Switch - stackable |
| Form Factor | Rack-mountable - 1U |
| Dimensions (WxHxD) | 17.5 x 1.7 x 10.8 inches |
| Memory | |
| RAM | 128 MB |
| Flash Memory | 16 MB flash |
| Networking | |
| Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
| Data Transfer Rate | 1 Gbps |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Routing Protocol | RIP-1, RIP-2, HSRP, static IP routing |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON 2, SNMP, RMON, Telnet, SNMP 3 |
| Connectivity Technology | Wired |
| Communication Mode | Half-duplex, full-duplex |
| MAC Address Table Size | 12K entries |
| Status Indicators | Port status, link activity, port transmission speed, port duplex mode, power |
| Features | Flow control, full duplex capability, routing, auto-sensing per device, DHCP support, auto-negotiation, ARP support, trunking, load balancing, VLAN support, IGMP snooping, manageable, stackable, Redundant Power System connector |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Expansion / Connectivity | |
| Interfaces |
24 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 1 x management - console - RJ-45 2 x network stack device |
| Miscellaneous | |
| Cables Included | 1 x serial cable |
| MTBF | 210,936 hour(s) |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS+ |
| Compliant Standards | CE, FCC Class A certified, CSA, UL, TUV GS, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024 |
| Power | |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational | 135 Watt |
| Software / System Requirements | |
| Software Included | Standard Multilayer Software Image (SMI) |
| Manufacturer Warranty | |
| Service & Support | Limited lifetime warranty |
| Environmental Parameters | |
| Operating Temperature Range | 0°C to 45°C |
| Operating Humidity Range | 10% to 85% |
| Max Altitude Operating | 10% to 85% |
Half of our customers ask for a refurbished price.
Get more for your money. With savings of over 50% compared to NEW equipment.
Refurbished has Fewer Returns
The percentage of returns for refurbished products from Digital Devices, Inc is significantly low. This is mainly due to the rigorous testing procedures.
Refurbished has Fewer Failures
Refurbished equipment has been tried and tested. Tests demonstrate that the failure of new product is highest within the first 48 hours. Hence you are buying a better and reliable product by purchasing refurbished.
Warranty
Digital Devices, Ltd offers a 90 days warranty on all refurbished equipment. In some cases it matches New equipment warranty at a fraction of price.
If you're logged in, please check your details and submit. If you're not logged-in/registered, please fill in the form below and submit. We will get back to you with a quote within one working day
* Denotes Required Field
Copyright © 2006-2012 www.digitaldevicesonline.com All Rights Reserved.