Cisco's Catalyst WS-C3750E-24TD-E is a 24 ports switch. It has an Ethernet based switching protocol and a redundant power system (RPS) connector. The Cisco Catalyst WS-C3750E-24TD-E switch has an operating temperature range of 0 Degree Celsius to 45 Degree Celsius.
General | |
---|---|
Product Description | Cisco Catalyst WS-C3750E-24TD-E |
Device Type | Switch - stackable |
Form Factor | Rack-mountable - 1U |
Dimensions (WxHxD) | 17.5 x 1.8 x 18.1 inches |
Memory | |
RAM | 256 MB |
Flash Memory | 64 MB flash |
Networking | |
Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
Data Transfer Rate | 1 Gbps |
Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
Routing Protocol | OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, static IP routing, PIM-DM, OSPFv3 |
Remote Management Protocol | RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3 |
Connectivity Technology | Wired |
Communication Mode | Half-duplex, full-duplex |
Switching Protocol | Ethernet |
Status Indicators | Link activity, port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system |
Features | Auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Expansion / Connectivity | |
Expansion Slots Total (Free) | 2 ( 2 ) x X2 |
Interfaces |
24 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 1 x management - console - RJ-45 1 x management - Ethernet 10Base-T/100Base-TX - RJ-45 2 x network stack device |
Miscellaneous | |
Authentication Method | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Compliant Standards | CE, FCC Class A certified, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1 |
Software Included | Cisco IOS IP Services |
Power | |
Power Device | Power supply - plug-in module |
Voltage Required | AC 120/230 V ( 50/60 Hz ) |
Features | Redundant Power System (RPS) connector |
Manufacturer Warranty | |
Service & Support | Limited warranty - 90 days |
Environmental Parameters | |
Operating Temperature Range | 0°C to 45°C |
Operating Humidity Range | 0% to 95% |
Half of our customers ask for a refurbished price.
Get more for your money. With savings of over 50% compared to NEW equipment.
Refurbished has Fewer Returns
The percentage of returns for refurbished products from Digital Devices, Inc is significantly low. This is mainly due to the rigorous testing procedures.
Refurbished has Fewer Failures
Refurbished equipment has been tried and tested. Tests demonstrate that the failure of new product is highest within the first 48 hours. Hence you are buying a better and reliable product by purchasing refurbished.
Warranty
Digital Devices, Ltd offers a 90 days warranty on all refurbished equipment. In some cases it matches New equipment warranty at a fraction of price.
If you're logged in, please check your details and submit. If you're not logged-in/registered, please fill in the form below and submit. We will get back to you with a quote within one working day
* Denotes Required Field