Features
| Key Features of Cisco Catalyst WS-C3560E-48TD-S 48 ports switch |
| Cisco’s Catalyst WS-C3560E-48TD-S is a 48 ports switch. It has an Ethernet 10Base-T/100Base-TX/1000Base-T RJ-45 interface and a management console. The Cisco Catalyst WS-C3560E-48TD-S switch has an operating temperature range of 0°C to 45°C and a humidity range of 10% to 85%. |
|
Technical Detail
| General |
| Device Type |
Switch |
| Form Factor |
Rack-mountable - 1U |
| Width |
44.5 cm |
| Depth |
46 cm |
| Height |
4.5 cm |
| Memory |
| RAM |
128 MB |
| Flash Memory |
64 MB Flash |
| Networking |
| Ports Qty |
48 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
| Data Transfer Rate |
1 Gbps |
| Data Link Protocol |
Ethernet, Fast Ethernet, Gigabit Ethernet |
| Remote Management Protocol |
RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3 Wired |
| Connectivity Technology |
Wired |
| Communication Mode |
Half-duplex, full-duplex |
| Features |
Auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS) |
| Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Expansion / Connectivity |
| Interfaces |
48 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 1 x management - console - RJ-45 1 x management - Ethernet 10Base-T/100Base-TX - RJ-45 |
| Environmental Parameters |
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
45 °C |
| Humidity Range Operating |
10 - 85% |
|
|
