Features
| Key Features of Cisco Catalyst 2960-48TC-S Switches |
| Cisco Catalyst 2960 Series Intelligent Ethernet Switches enable entry-level enterprise, medium-sized, and branch office networks to provide enhanced LAN services. This family of fixed-configuration, standalone devices provide desktop 10/100 Fast Ethernet and 10/100/1000 Gigabit Ethernet connectivity. |
|
Technical Detail
| General |
| Device Type |
Switch |
| Enclosure Type |
Rack-mountable - 1U |
| Width |
44.5 cm |
| Depth |
23.6 cm |
| Height |
4.4 cm |
| Memory |
| RAM |
64 MB |
| Flash Memory |
32 MB Flash |
| Networking |
| Ports Qty |
48 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Auxiliary Network Ports |
2x10/100/1000Base-T/SFP (mini-GBIC)(uplink) |
| Data Transfer Rate |
100 Mbps |
| Data Link Protocol |
Ethernet, Fast Ethernet |
| Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP |
| Connectivity Technology |
Wired |
| Communication Mode |
Half-duplex, full-duplex |
| Switching Protocol |
Ethernet |
| MAC Address Table Size |
8K entries |
| Features |
Auto-sensing per device, DHCP support, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Quality of Service (QoS) |
| Expansion / Connectivity |
| Interfaces |
2 x network host - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 48 x network node - Ethernet 10Base-T/100Base-TX - RJ-45 |
| Miscellaneous |
| MTBF |
336,983 hour(s) |
| Authentication Method |
RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Compliant Standards |
CE, TUV GS, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, FCC Part 15, UL 1950 Third Edition, CSA 22.2 No. 950 Third Edition |
| Power |
| Power Device |
Power supply - internal |
| Voltage Required |
AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational: |
45 Watt |
| Features |
Redundant Power System (RPS) connector |
| Environmental Parameters |
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
45 °C |
| Humidity Range Operating |
10 - 85% |
|
|
