Features
| Key Features of Cisco Catalyst WS-C3560G-48TS-S 48 ports switch |
| Cisco’s Catalyst WS-C3560G-48TS-S is a 48 ports fixed configuration switch. It has an on board DRAM memory of 128MB and a speed of 38.7Mpps. The Cisco Catalyst WS-C3560G-48TS-S switch supports up to 12,000 MAC addresses and works on AC input only. |
| |
|
Technical Detail
|
General
|
|
Product Description
|
Cisco Catalyst 3560G-48TS SMI 48 ports switch
|
|
Device Type
|
Switch
|
|
Form Factor
|
External - 1U
|
|
Dimensions (WxHxD)
|
17.5 x 1.73 x 16.1 inches
|
|
Memory
|
|
RAM
|
128 MB
|
|
Flash Memory
|
32 MB flash
|
|
Networking
|
|
Ports Qty
|
48 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
|
|
Data Transfer Rate
|
1 Gbps
|
|
Data Link Protocol
|
Ethernet, Fast Ethernet, Gigabit Ethernet
|
|
Routing Protocol
|
RIP-1, RIP-2, static IP routing
|
|
Remote Management Protocol
|
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c
|
|
Connectivity Technology
|
Wired
|
|
Communication Mode
|
Half-duplex, full-duplex
|
|
Switching Protocol
|
Ethernet
|
|
MAC Address Table Size
|
12K entries
|
|
Status Indicators
|
Port status, port transmission speed, port duplex mode, power
|
|
Features
|
Full duplex capability, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, auto-uplink (auto MDI/MDI-X), IGMP snooping, manageable
|
|
Compliant Standards
|
IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
|
|
Expansion / Connectivity
|
|
Expansion Slots Total (Free)
|
4 ( 4 ) x SFP (mini-GBIC)
|
|
Interfaces
|
48 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
1 x management- console - RJ-45
|
|
Miscellaneous
|
|
Authentication Method
|
Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2)
|
|
Compliant Standards
|
CE, FCC Class A certified, TUV GS, BSMI CNS 13438 Class A, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CISPR 22, CSA 22.2 No. 60950, CB, AS/NZ 3548 Class A, FCC Part 15, MIC
|
|
Software Included
|
Standard Multilayer Software Image
|
|
Power
|
|
Power Device
|
Power supply - internal
|
|
Voltage Required
|
AC 120/230 V ( 50/60 Hz )
|
|
Power Consumption Operational
|
160 Watt
|
|
Features
|
Redundant Power System (RPS) connector
|
|
Manufacturer Warranty
|
|
Service & Support
|
Limited lifetime warranty
|
|
Environmental Parameters
|
|
Operating Temperature Range
|
0°C to 45°C
|
|
Operating Humidity Range
|
10% to 85%
|
|
| Close detail |
|
